A1 :

WPS supports Windows 2000/XP/Vista, Pocket PC 2003, Windows Mobile 5.0, Mac OS 10.4. * Mac OS 10.4, Pocket PC 2003 and Windows Mobile 5.0 compatible application software are sold separately.

A2 :

WPS supports 802.11b and 802.11g.

A3 :

Yes, WPS supports login code protection which controls the security of accessing to this device, and supports WEP (64 & 128 bits) for transmission security.

A4 :

WPS supports the playback of MPEG1/MEPG2/MPEG4/WMV9/DIVX/XVID video formats. For best video playback performance, it is strongly recommended that the Wired connection is utilized. * As for the wireless connection, 802.11g is recommended and actual performance will vary depending on environment.

A5 :

The distance of wireless transmission is normally up to 100 meters, depending on network environment conditions such as over-used AP, network traffic rate, and quality of network connection.

A6 :

To upgrade the firmware, you need to enter the default web page for firmware upgrade with the admin privilege to the WPS, then select the latest firmware in awd file format and submit to upgrade. It takes 5~7 minutes to complete the process. * After that, every client is required to un-install the WPS application and re-install the updated wps software downloaded from the device.

A7 :

If you would like to gain an access to the internet through WPS, please follow the instructions listing below to modify your network settings:

1. Please connect your PC client to WPS

2. Modify the “Gate Keeper” setting from the default “All Block” mode to “All Pass” or     “Internet Only” mode in the administrator page.

3. Connect WPS to your DHCP server (Like your home ADSL Modem) by using the     standard LAN cable.

4. The access to the internet is gained through the WPS.

page [1]